Now, when many users use the woodworking cutting machine, if there is a problem of not vacuuming, it will cause serious harm to the surrounding environment and the operator's body and equipment. Do you know how to deal with the dust generated during the operation of the slitter? next! Will introduce you in detail!

目前，大多數開料機都配備了除塵裝置，但粉塵問題尚未得到根本解決。以下是對開料機除塵問題的分析：

At present, most cutting machines are equipped with dust removal devices, but the dust problem has not been fundamentally solved. The following is the analysis of dust removal of the opener:

但是，在目前的情況下，我們還是選擇除塵設備。除塵器的選擇應考慮工作場所的凈化要求和粉塵的性質。大中型木屑可以及時收集，而細木屑傳統上是用氣動吸塵器或袋式吸塵器收集。

However, in the current situation, we still choose dust removal equipment. The selection of dust collector shall consider the purification requirements of the workplace and the nature of dust. Large and medium-sized sawdust can be collected in time, while fine sawdust is traditionally collected with pneumatic vacuum cleaner or bag vacuum cleaner.

隨著木工機械設備的發展，開料機的應用越來越廣泛，單手操作逐漸向自動化操作轉變。然而，在數控開料過程中，一個非常重要的問題一直困擾著廣大的制造商和用戶，在這個過程中會產生大量的粉塵。

With the development of woodworking machinery and equipment, the application of cutting machine is more and more extensive, and the single hａnd operation is gradually changing to automatic operation. However, in the process of NC cutting, a very important problem has been perplexing the majority of manufacturers and users, and a large amount of dust will be produced in this process.

目前國內還沒有廠家安裝大型除塵開料機設備，因此單一的除塵集塵裝置可以附著在機床本身上，取得更好的效果。操作人員應佩戴防護眼鏡和防塵口罩，以保護眼睛和呼吸器官。在機床上操作時，佩戴大面積防塵口罩，以減少灰塵的傷害。使用數控開料機的用戶要注意保護呼吸道，不要讓灰塵進入鼻腔!時間長了會對健康有害!

At present, no domestic manufacturer has installed large-scale dust removal and cutting machine equipment, so a single dust removal and collection device can be attached to the machine tool itself to achieve better results. Operators shall wear protective glasses and dust masks to protect eyes and respiratory organs. When operating on the machine tool, wear a large-area dust mask to reduce the injury of dust. Users using CNC cutting machine should pay attention to protect the respiratory tract and do not let dust enter the nasal cavity! A long time will be harmful to health!

木工開料機是一種自動機床，它配備有程序控制系統，可以使機器按照編程的程序移動和加工零件。出現故障時，需要按順序操作，操作不當可能會對員工或加工件造成傷害。

Woodworking cutting machine is an automatic machine tool. It is equipped with program control system, which can make the machine move and process parts according to the programmed program. In case of failure, it needs to be operated in sequence. Improper operation may cause injury to employees or machined parts.

木工開料機運行過程中產生的粉塵需要及時處理。如果有條件的工廠可以為工人佩戴防塵口罩，減少粉塵的影響，否則時間長了會對人體造成嚴重影響，所以大家都要做好防護。

The dust generated during the operation of woodworking opener needs to be treated in time. If qualified factories can wear dust masks for workers to reduce the impact of dust, otherwise it will have a serious impact on the human body for a long time, so everyone should do a good job in protection.

以上就是為大家介紹的有關石材雕刻機的詳細介紹,希望對您有所幫助.如果您有什么疑問的話,歡迎聯系我們.我們將以的態度,為您提供服務/

The above is the detailed introduction of stone carving machine. I hope it will be helpful to you If you have any questions, please contact us We will provide you with professional service /